Hikvision DS-3E0326P-E/M(B) 24-Port Long-Range PoE Switch: 300 m Extend Mode and Fiber Uplink
A 24-port 100 Mbps long-range PoE switch with one Gigabit RJ45 and one Gigabit SFP fiber port, extend mode up to 300 m and high-priority ports for important cameras.
In short: the DS-3E0326P-E/M(B) has 24 × 100 Mbps PoE ports plus one Gigabit RJ45 and one Gigabit SFP fiber port. Its extend mode reaches cameras up to 300 m away, and high-priority ports keep important cameras’ video smooth when the network is busy. It is unmanaged, so it works out of the box. Price on request.
Key features
| PoE ports | 24 × 100 Mbps |
| Uplinks | 1 × 1000 Mbps RJ45, 1 × 1000 Mbps SFP fiber |
| Long range | Extend mode up to 300 m |
| Priority | High-priority ports for key cameras |
| Management | Unmanaged, layer 2 |
Why the fiber port matters
With an SFP fiber uplink, the switch can sit in another building or far side of a factory and connect back to the NVR on fiber: see the fiber story and fiber vs wireless bridge.
Price
Price on request: call or WhatsApp us. Read the PoE switch guide. More: network switches.
Running a 24-camera area
With 24 camera ports, this switch can serve a whole factory floor, a large warehouse or a building of a campus. Connect it to the control room by fiber through the SFP port when the distance is long or cables pass between buildings, and keep the RJ45 Gigabit port for the local recorder. Put cameras at gates and cash points on the high-priority ports, use extend mode only for the few far cameras, and check the total PoE power for all cameras including infrared at night. Mount it in a ventilated rack on a UPS, with every port labelled, and keep a written camera list for maintenance. Check the switch status lights during each maintenance visit.
Products mentioned in this guide
Genuine products with official warranty, delivered anywhere in Bangladesh.




